71M6515H
A Maxim Integrated Products Brand
Energy Meter IC
DATA SHEET
JULY 2011
Since the RMS calculation involves the post-processor , these registers will not be functional when the CE_ONLY bit in the
CONFIG register is set. If higher precision is required, the host must calculate the RMS currents from the values in the
IASQSUM, IBSQSUM, and ICSQSUM registers. For even higher precision, the IASQFRACT, IBSQFRACT, ICSQFRACT
registers should be used.
Example : The register IRMS_C reads the value 2,079,670. Assuming IMAX to be 208A, and using the formula
above, we determine the RMS current of phase C to:
I RMS = 2079670 ?
6 .8781 ? 10 ? 9 208
60
= 0 . 0385 A
VASQSUM (0x3D) , VBSQSUM (0x3E) , VCSQSUM (0x3F)
These registers hold the sum of the squared voltage samples collected during the previous accumulation interval. The
values for VASQSUM, VBSQSUM, and VCSQSUM are provided directly by the CE and are not post-processed. The
magnitude of the accumulated samples is determined by:
LSB = VMAX 2 9 . 4045 ? 10 ? 13 V 2 h
VAH_A (0x06) , VAH_B (0x07) , VAH_C (0x08)
These registers hold the apparent energy collected during the previous accumulation interval. The magnitude of the
accumulated samples is determined by:
LSB = 9 . 4045 ? 10 ? 13
VMAX IMAX
In _ 8
VAh
Since the VAh calculation involves the post-processor , these registers will not be functional when the CE_ONLY bit in the
CONFIG register is set.
VARH_A (0x03) , VARH_B (0x04) , VARH_C (0x05)
These registers hold the reactive energy collected during the previous accumulation interval. The magnitude of the
accumulated samples is determined by:
LSB = 9 . 4045 ? 10 ? 13
VMAX IMAX
In _ 8
VARh
VPHASE_ABC (0x10)
This register holds the phase angle between the voltages of phases A/C and A/B. The LSB is one degree.
Bits 15-0: These bits ( VPHASE_AC ) hold the phase angle between VA and VC.
Bits 31-16: These bits ( VPHASE_AB ) hold the phase angle between VA and VB.
VRMS_A (0x09) , VRMS_B (0x0A) , VRMS_C (0x0B)
These registers hold the post-processed RMS voltage for each phase. Only the 16 most significant bits are used. The
magnitude of the values is determined by:
LSB =
6.8781 ? 10 ? 9 VMAX
SUM _ CYCLES
V rms
Since the RMS calculation involves the post-processor , these registers will not be functional when the CE_ONLY bit in the
CONFIG register is set.
Page: 45 of 60
? 2005 ? 2011 Teridian Semiconductor Corporation
1.6
相关PDF资料
71M6521BE-IGTR/F IC ENERGY METER 8K FLASH 64-LQFP
71M6533G-IGTR/F IC ENERGY METER 3PH 100LQFP
71M6543F-IGT/F IC ENERGY METERING
71M6545-IGT/F IC ENERGY METERING
720-10007-00300 CBL D-SUB 9PIN FMAL-25PIN FML 3M
720-10010-00025 CBL DSUB 9PIN FML-25PIN MAL .25M
720-10020-00300 CBL DSUB 9PIN FML-9PIN MALE 3M
720-10021-00300 CBL DSUB 9PIN FML-9PIN FEMAL 3M
相关代理商/技术参数
71M6515H-IGTR 制造商:Maxim Integrated Products 功能描述:71M6515H-IGT - T/REEL - Tape and Reel 制造商:Maxim Integrated Products 功能描述:Metering Systems on a Chip - SoC Energy Meter IC
71M6515H-IGTR/F 功能描述:计量片上系统 - SoC Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6515H-IGTW/F 功能描述:计量片上系统 - SoC Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6515H-IGTW1 制造商:TERIDIAN 制造商全称:TERIDIAN 功能描述:Up to 10ppmC precision ultra-stable voltage reference Digital temperature compensation
71M6515H-IGTWR1 制造商:TERIDIAN 制造商全称:TERIDIAN 功能描述:Up to 10ppmC precision ultra-stable voltage reference Digital temperature compensation
71M6521BE 制造商:TERIDIAN 制造商全称:TERIDIAN 功能描述:Energy Meter IC
71M6521BE-DB 制造商:Maxim Integrated Products 功能描述:Development Boards & Kits - 8051 71M6521BE Demo Brd
71M6521BE-IGT/F 功能描述:计量片上系统 - SoC Residential Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel